CNC sourcing answers, backed by supplier records.
Describe the part. Get a structured brief, the published suppliers that fit it, and the evidence behind each match.
The answer comes first. The decision table follows.
Each guide opens with a short answer you can act on, then the criteria, the tolerances, and the questions to put in an RFQ.
supplier Are the ISO Certificates on Chinese Supplier Profiles Current? A Check of 635 Certificates
CNC Compass read 635 ISO 9001, IATF 16949, ISO 14001, ISO 45001 and ISO 13485 certificate images shown by 287 Chinese machining suppliers and checked a sample by hand. About 54% are past their expiry date and about 10% are issued to a different company; under 2% are not certificates at all. At least 113 of the 287 suppliers (39%) show a current certificate in their own name. An expired image often means the profile was not updated, so ask for the current certificate and look it up in the national CNCA register before relying on it.
Read the guide- supplier
Is a Chinese "Manufacturer" Really a Factory? What 439 Self-Described CNC Manufacturers Turned Out to Be
Of 439 Chinese parts suppliers that call themselves a manufacturer on their marketplace profile, CNC Compass confirmed 219 (50%) as source factories from their own certificates or business registration and identified 89 (20%) as trading companies; 128 (29%) could not be settled either way. Suppliers labelled only "Manufacturer" turned out to be trading companies more often (32%) than those labelled "Manufacturer and trading company" (12%). Stated headcount, factory area and audit badges look much the same on both sides; the business registration, certificates in the company's own name with a production scope, and patents separate them.
- supplier
How Many Chinese CNC Suppliers Are High-Tech or "Zhuanjingtexin"? Data From 460 Reviewed Suppliers
Of 460 Chinese machining suppliers CNC Compass reviewed, 154 (33%) appear in an official government recognition notice: 132 as High-Tech Enterprises, 61 as Innovative SMEs, 59 as Specialised and Sophisticated ("Zhuanjingtexin") SMEs, 3 of them at the national "Little Giant" tier, and 56 as Technology-based SMEs. 129 of the 225 confirmed source factories (57%) hold one, against 25 of the other 235 suppliers (11%). The schemes check R&D, technical staff and owned intellectual property, not part quality, and each notice can be looked up by the company's Chinese registered name.
- supplier
What MOQ and Lead Time Do Chinese CNC Shops Expect? Data From 595 Suppliers
Of 575 profiles that state an off-season lead time, 56% say "within 15 workdays" and 37% "one month"; 39% say they are slower in peak season. Half the suppliers publish an MOQ, and 62% of those accept a single piece. Treat these as the supplier's stated starting point and fix the date and quantity in the quotation.
- supplier
Factory Audits and QC Staffing at Chinese CNC Suppliers
86% of the supplier profiles CNC Compass read carry an on-site audit by a named inspection company (SGS, TÜV Rheinland, BV, or CTI). Half of the 275 suppliers that report QC staff have one or two inspectors; 13% have ten or more. Use the audit as a check on the company and site, and ask how your parts will be inspected.
- supplier
Checking a Chinese CNC Supplier's ISO 9001 or IATF 16949 Certificate
Every management-system certificate issued in China is recorded on the national register of the Certification and Accreditation Administration (CNCA). Search it by the company's Chinese registered name and compare the certificate number with the one on the supplier's listing. CNC Compass found register records for 187 of 595 suppliers; 65 show the same certificate number on their listing.
- supplier
Payment Terms and Incoterms Chinese CNC Suppliers Accept
Almost every supplier lists T/T bank transfer (99%) and FOB (99%). PayPal is listed by 76%, letters of credit by 84%. Delivered terms are rarer: 20% list DDP. The profile shows what a supplier is willing to discuss; the terms of your order are the ones written in the proforma invoice.
- supplier
CNC Supplier Audit Checklist: Evidence Before Capability Claims
Audit the production route for your actual part family, not just the factory tour. Verify objective evidence for process planning, machine and fixture suitability, inspection capability, material traceability, special-process control, nonconformance handling, change control, and capacity.
- finish
Aluminum Anodizing Specification Guide for Machined Parts
Specify the governing anodizing standard, coating type and class, sealing, masking, appearance acceptance, and post-coating dimensional requirements. Do not use “black anodize” as the whole specification: color alone does not define coating performance or thickness.
- finish
CNC Machining Tolerances: How to Specify What Matters
Apply tight tolerances only to features that control fit, sealing, motion, alignment, or safety. Define the datum scheme and inspection method, use a stated general-tolerance standard for the remaining dimensions, and ask the supplier to identify any feature that drives special setup or inspection cost.
- material
Aluminum 6061 vs 7075 for CNC Machined Parts
Use 6061 as the default when moderate strength, corrosion resistance, weldability, availability, and predictable finishing matter. Use 7075 when the design needs substantially higher strength and the part can accept higher material cost, more limited joining options, and tighter control of temper and corrosion protection.
- process
CNC Milling vs Turning: Which Process Fits Your Part?
Use turning when the part is fundamentally rotational around a centerline; use milling when it is prismatic or needs features approached from several directions. Choose mill-turn only when one setup meaningfully reduces concentricity risk, handling, or total cycle time.
Reviewed supplier records, each with a source.
Each reviewed record has been checked against its source listing and the Chinese business registry, and links to the pages its facts come from.
Supplier shortlists
- CNC Milling Suppliers in China 300 reviewed
- Stamping Suppliers in China 176 reviewed
- CNC Turning Suppliers in China 159 reviewed
- Sheet Metal Fabrication Suppliers in China 151 reviewed
- Aluminum CNC Milling Suppliers in China 139 reviewed
- Stainless Steel CNC Milling Suppliers in China 122 reviewed
- Aluminum Stamping Suppliers in China 86 reviewed
- CNC Machining Suppliers in Dongguan 51 reviewed
- CNC Machining Suppliers in Ningbo 32 reviewed
- CNC Machining Suppliers in Shenzhen 29 reviewed
- Verified Source Factories for Machined and Metal Parts 225 reviewed
- Low-volume and Prototype CNC Suppliers in China 182 reviewed
Records are reached through a query or from the related-supplier list on each guide. A missing value is shown as Not declared rather than inferred.
The same index, readable by agents.
Every fact on this site is in static HTML with JSON-LD. The query above is also a JSON endpoint and an MCP tool, described in OpenAPI.
- Static pages
- Supplier, guide, material, and process pages render without client-side JavaScript.
- Search API
- Send a natural-language brief. Receive normalized fields, matched suppliers with reasons, and unmet requirements.
- MCP server
- Connect an MCP client over Streamable HTTP:
search_suppliersfinds matches,get_supplierreturns a full record with its sources and evidence,list_facetslists the filters. Stateless, read-only, structured results. - WebMCP tool
- Chrome builds in the WebMCP origin trial expose the same search as an in-page tool. Other browsers use the API above.
Have a part to source? Send the brief.
We match it against the published records and reply with candidate suppliers and the evidence for each. Supplier contact details stay with us until you ask.
Submit a brief- Include
- Material and grade, quantity, and the tolerances that matter to function.
- Helpful
- Surface finish, certification needs, target lead time, and a drawing if you have one.
- Reply
- A shortlist with matching reasons and the requirements no record could confirm.