supplier guide

Is a Chinese "Manufacturer" Really a Factory? What 439 Self-Described CNC Manufacturers Turned Out to Be

Half of 439 Chinese suppliers that call themselves manufacturers could be confirmed as source factories; one in five turned out to be trading companies. Which signals separate them, and how to check one yourself.

Short answer Of 439 Chinese parts suppliers that call themselves a manufacturer on their marketplace profile, CNC Compass confirmed 219 (50%) as source factories from their own certificates or business registration and identified 89 (20%) as trading companies; 128 (29%) could not be settled either way. Suppliers labelled only "Manufacturer" turned out to be trading companies more often (32%) than those labelled "Manufacturer and trading company" (12%). Stated headcount, factory area and audit badges look much the same on both sides; the business registration, certificates in the company's own name with a production scope, and patents separate them.
Decision factorRecommendationNotes
Profile says "Manufacturer"Treat it as a claim and check the registration and certificates before relying on it60 of 190 suppliers labelled only "Manufacturer" were identified as trading companies (32%).
Profile shows a large factory area or headcountDo not use it to tell a factory from a resellerTrading companies stating these figures gave a median of 59 employees and 4,285 m², close to source factories (63 and 6,000 m²).
Profile carries an SGS, TÜV or BV audit badgeRead the audit for what it checked; it does not settle who machines the parts75% of trading companies and 80% of source factories carry one.
Business registration shows manufacturing, a production scope and 10+ insured staff at the listed addressStrong evidence of an operating factory41 of the 225 source factories were confirmed on this basis alone.
Supplier holds patents or a High-Tech recognition in its own nameSupporting evidence of in-house engineering127 of 225 source factories hold granted patents, against 5 of 101 trading companies.

What the label turned out to mean

Each supplier on Made-in-China.com picks a business type for its profile. CNC Compass reviewed 460 suppliers of machined, cast, forged and fabricated parts against China’s business registry and their certificates. 439 of them call themselves a manufacturer:

Profile labelSuppliersConfirmed source factoryNot settledTrading company
Manufacturer19089 (47%)39 (21%)60 (32%)
Manufacturer and trading company249130 (52%)89 (36%)29 (12%)
All self-described manufacturers439219 (50%)128 (29%)89 (20%)

The other 3 self-described manufacturers turned out to be sister companies of the factory that holds the certificates. All 5 suppliers that call themselves a trading company are one. The plain “Manufacturer” label was the less reliable one: a third of the suppliers choosing it turned out to resell parts made elsewhere.

“Not settled” means the evidence did not reach either rule below. It is not a finding against the supplier, for example a workshop with fewer than ten insured staff, or with only one certificate in its own name.

How a source factory was confirmed

CNC Compass marks a supplier a source factory on one of two grounds:

  1. Own certificates (184 of 225): at least two management-system or product certificates issued to the supplier itself, with a production or manufacturing scope, agreeing with its registration and address.
  2. Business registration (41 of 225): registered in manufacturing, production or processing items for its kind of parts in the business scope, at least 10 insured staff in the latest annual report, and a registered address matching the listing that is not an office tower, residence or business centre.

A supplier was identified as a trading company when the evidence showed its parts are made by another company: certificates held by other companies, certificate scopes limited to sales, a wholesale or import-export registration with no production scope, or an office address with one to three insured staff.

What the profile claims do and do not tell you

SignalSource factories (225)Not settled (131)Trading companies (101)
Stated employees, median632659
Stated factory area, median6,000 m²2,900 m²4,285 m²
Third-party audit badge on the profile180 (80%)117 (89%)76 (75%)
Granted patents in the registered name127 (56%)45 (34%)5 (5%)
Government recognition (High-Tech, Zhuanjingtexin and others)129 (57%)23 (18%)1 (1%)

Medians cover the suppliers that state the figure: 139 source factories and about a third of the trading companies. The marketplace claims and audit badges barely separate the groups. Registry-based signals do: patents and government recognitions sit almost entirely with manufacturers. See High-Tech and Zhuanjingtexin suppliers for how to look those up.

By province

ProvinceReviewed suppliersSource factoriesTrading companies
Guangdong13264 (48%)17 (13%)
Zhejiang8943 (48%)18 (20%)
Shandong7640 (53%)17 (22%)
Jiangsu4827 (56%)13 (27%)
Fujian2814 (50%)8 (29%)
Hebei219 (43%)7 (33%)

Check a supplier yourself

  1. Ask for the Chinese registered name and the 18-character unified social credit code on its business licence.
  2. Look it up in the National Enterprise Credit Information Publicity System (gsxt.gov.cn) or a registry service. Check the industry, whether the business scope has production or processing items (制造, 加工, 生产) for your kind of part, and the insured staff in the latest annual report.
  3. Compare the registered address with the factory address you are given. An office tower or business centre address with a separate “factory” elsewhere often means another company does the machining.
  4. Check two certificates in the national CNCA register, as described in how to check a Chinese supplier’s ISO certificate: the holder should be the supplier itself and the scope should cover production, not only sales.
  5. If the supplier turns out to be a trading company, ask which factory makes your parts and check that company the same way.

Each reviewed supplier record on CNC Compass states the factory finding and its basis at the top of the page.

How these figures were counted

The figures cover the 460 reviewed (Verified) supplier records published on CNC Compass on 19 November 2026, found on Made-in-China.com and the Canton Fair and matched to their registered companies in China’s business registry. Profile labels and stated figures are what each supplier entered on its marketplace profile. Factory findings were made by the CNC Compass editorial team from the registry and the certificates on file; patents come from CNIPA data, recognitions from government notices. The catalogue is mostly suppliers of custom machined and metal parts, so the shares describe it, not Chinese manufacturing as a whole.

Frequently asked questions

How many Chinese suppliers that say they are manufacturers are really factories?
In CNC Compass's review of 439 self-described manufacturers of machined and metal parts, 219 (50%) were confirmed as source factories, 89 (20%) were identified as trading companies and 128 (29%) could not be settled with the evidence available. The figures cover suppliers found on Made-in-China.com and the Canton Fair, not all Chinese companies.
Is "Manufacturer and trading company" a warning sign?
Not by itself. Of 249 suppliers with that label, 12% turned out to be trading companies, against 32% of the 190 that chose "Manufacturer" alone, so the combined label is no reason to drop a supplier.
How can I tell if a Chinese supplier is a factory or a trading company?
Look the company up in China's business registry by its Chinese registered name: a factory is usually registered in manufacturing, has production or processing items in its business scope, pays social insurance for at least ten staff, and is registered at the address it lists. Then check that its ISO or IATF certificates are in its own name with a production scope, in the national CNCA register.
Do trading companies have to be avoided?
No. A trading company can manage several workshops and handle export. What matters is knowing who machines your parts, so you can ask for that factory's name, certificates and inspection records.

Supplier shortlists for this decision

Sources

  1. National Enterprise Credit Information Publicity System , State Administration for Market Regulation Checked 2026-11-19
  2. CNCA certification information query , Certification and Accreditation Administration of China Checked 2026-11-19
  3. Figures: CNC Compass supplier records, factory-status statistics of 2026-11-19 , CNC Compass Checked 2026-11-19

Turn the guidance into a sourcing brief.Describe your part and preserve the important engineering constraints.

Submit a brief

Editorial guidance should be checked against its cited first-party sources before publication. Updated 2026-11-19.